Description
ABS vented safety helmet. Innovative “baseball cap” shape to improve vision when looking up. Tested in normal wearing and reverse wearing to reduce encumbrance. Polyamide cradle: 3 textile straps with 8 fixing points. Foam sweat band. Adjustable ROTOR system : head sizes 53 to 64 cm. 2 possible positions of the headband (top/low) for a better comfort.
ABS.
Harness: Textile lining: polyamide. Sweat band: Polyester foam. Anchorage: HDPE. Headband: LDPE.
Harness: Textile lining: polyamide. Sweat band: Polyester foam. Anchorage: HDPE. Headband: LDPE.
REGULATION (EU) 2016/425
EN397:2012 + A1:2012 Protective helmets for industry
| MM | Molten metal spray | |
| LD | Lateral deformation | |
| -30°C +50°C | Use : Very low temperature – -30°C / +50°C |
USA STANDARDS
ANSI-ISEA Z89.1:2014 American National Standards Institute- Industrial Head protection -Hard Hat Types and Class Standards
| TYPE I | I | Type of impact protection : TYPE Ⅰ: Impact top of the head + Flammability + Penetration |
| CLASS C | C | Electrical protection class => Class C: Conductive: not electrically tested |
| Reverse wearing | 🗘Reverse wearing. | |
| HV | Additional special requirements : HV: High Visibility , LT: Lower Temperature, HT: Higher Temperature, 13🗘Reverse wearing. | |
| 53-64 cm | Sizes / Dimensions |
